Ensure that the Battery is turned ON using the Power on Toggle Switch on the top panel.
Then press the Silver Power Button on Front Panel for three seconds and release.
Wait for the LEDs to stabilise.
BMS Manual Reset -
Press and Hold the Silver Power Button on the Front Panel for 12-15 seconds.
The LED's will Flash then Scan up and down and will then settle.
After approx. 12-15 seconds the Green SOC LEDs will stabilise, and the Run Light (top) will flash.
Release the Silver Power Button.
The BMS has now been Manually Reset.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article