Viewing L-Series, G-Series and W-Series Sunsynk Battery Data on Mobile App

Pre-requisite – Before being able to view this Battery Data, your Datalogger must be upgraded to latest software revision.

When IP65 Batteries have been updated to software revision 0x100B (100B) you can see this on the mobile app, plus their individual SOC % value plus other data.

From your Plant(s) select the Plant to see Overview screen. At the bottom of the screen select Equipment, then at the top of the screen select Battery. Here you will see s/n of host Inverter.

Tap the drop down arrow on the right and here you will see the serial numbers of the L-Series, G-Series or W-Series Batteries in the Plant and their respective individual SOC % value.

To see individual data for each Battery simply tap the serial number you want to view. What is important here is the ability from your App to view the individual SOC % value for each Battery. This enables you to determine if their SOC’s have become out of sync by not being charged regularly to 100% and so consider setting an overnight Grid Charge using your Timer Settings.

Please Note – This new feature is only available for the L-Series, G-Series and W-Series Models of Sunsynk Batteries and is not applicable for other Models of earlier Sunsynk or any 3^rd party Batteries.